Tenfil TF 400

Tenfil TF 400

TENFIL Gewindepaste TENFIL TF 400 es handelt sich um eine Paste in Wasserdispersion (ohne Zugabe von Lösungsmitteln) die vorbeugend für einen besseren Halt auf die Gewinde aufgetragen wird. Sie ist für 3 spezifische Anwendungen (Wasser – Luft – Gas), verfügbar und wird den Kunden in speziellen Behältern geliefert.

Wichtigste Eigenschaften:

  • Sehr gute Beständigkeit gegen die meisten Lösungsmittel
  • Nicht entflammbar
  • Ungiftig
  • Problemlos in der Anwendung
TECHNICAL INFORMATION
Properties   Value
  APPEARANCE   Blue paste
  SOLID CONTENT   50 – 55%
  pH   4 – 6
  VISCOSITY   12000 +/- 1000 cP (metodo Brookfield)
  DENSITY   1,07-1,08 gr/cm3 @ 20°C
  SURFACE TENSION   38 dyn/cm
  FLASH POINT   NoT applicable
  BOILING POINT   100°C (212°F)
  STIFFNESS POINT   About 0°C
  COMPOSITION   PTFE-based aqueous dispersion

 

DRYNG TIME
  TEMPERATURE °C   FORCED AIR m3/min   DRYING TIME   END POLYMERIZATION  
  80   9   80 seconds   20 minuts  
  50   9   120 seconds   2 hours  
  20   0   1 hour   12 hours  

 

APPLICATION NOTES
  Measure   Nr. Pz. Per kg
  1/8 “   12500
  1/4 “   7000
  3/8 “   6660
  1/2 “   3350
  3/4 “   2800
  1 “   2500

 

SAFETTY
TENFIL TF400 should be handled like other Lineplus PTFE resin. When PTFE resin are heated to temperatures above 350°C, a small amount of decomposition products, which may be harmful, are given off. Avoid inhalation of these fumes. Ovens and process equipment should be vented and adequate ventilation provided in the working area. For further information refer to the Lineplus PTFE material safety data sheet. STORAGE AND STABILITY
TENFIL TF400 is stable for one year if stored in original unopened container at temperatures between +4°C - +35°C
(39,2°F – 95°F).

PACKAGING
Kg 10 - Wide-mouthed bucket with lid.

NEWS& GESCHEHEN

Dienstag, 10. September 2019 09:04

FLONTECH – THE NEW LOGO

After some years of use, Flontech logo has been re-stylized into a more modern graphic design, taking the occasion of the new web site and leaflets launching some new product families as well.

Read more
Dienstag, 11. Juni 2019 10:45

GUARNIFLON – IN FULL COMPLIANCE WITH INTERNATIONAL QUALITY NORMS

Whether you design, manufacture or supply materials, you need to comply with international norms, standards, Directives and Regulations across the world.

Read more