TEKCLEAN est un nouveau produit antibactérien, breveté et créé à la suite des demandes de Thales Alenia Space (secteur “Cleanliness & Bio Resources”) pour l’environnement de vol des êtres humains dans l’espace.
Il a été testé selon la norme ISO 22196: 2007 “Plastiques - mesures de l’activité antibactérienne sur des surfaces plastiques”.

Les surfaces de PTFE standard favorisent les croissances bactériennes, tandis que TEKCLEAN élimine les bactéries et empêche la croissance

TEKCLEAN est disponible en films, feuilles, plaques , tubes et tiges et en usinées finies selon dessin et en particulier pour des applications dans les domaines pharmaceutique, médical et alimentaire.

Sample	BACTERIA
	Klebsiella pneumoniae ATCC 4352
	cell/cm² @ T0	cell/cm² @ 24h	R*
Standard PTFE Reference	2,06 x 10 4	2,92 x 10 5
TEKCLEAN antibacterial PTFE	2,06 x 10 4	0,0	6,15

Sample	BACTERIA
	Staphylococcus aureus ATCC 6538
	cell/cm² @ T0	cell/cm² @ 24h	R*
Standard PTFE Reference	1,96 x 104	1,96 x 105
TEKCLEAN antibacterial PTFE	2,06 x 104	0,0	5,96

* Antibacterial activity

Le compound G673 est un nouveau produit breveté, où la base en PTFE a été améliorée par une charge spéciale, capable de conférer des finitions spéciales de surfaces, en particulier de glissement après l’usinage, absolument supérieure par rapport aux valeurs obtenues avec l’utilisation d’une charge d’aciers standards.
Créé avec l’utilisation d’une charge spéciale en Inox 316L, notre G673 redéfinit les standards des compounds de PTFE en termes de résistance, dureté, d’élasticité, durée et état de surface.

The total yearly production output of 5.000 tons. is including virgin PTFE products as well as high performance compounded PTFE grades developed by Industrial Plastics & Machine Engineering, the R&D department fully supporting the production site.

TEKPORE® PROPERTIES
THE MAIN PROPERTIES OF INDUSTRIAL PLASTICS & MACHINE POROUS PTFE
Porous PTFE grades are produced from suspension PTFE powders and specifically they are a mixture of different particle size distributions and hardness degrees to achieve the desired level of porosity.
Taking advantage of the up-to-date technologies and know-how used to process sintered PTFE products, Industrial Plastics & Machine has developed different grades of porous PTFE with the following main properties:

• Air flow rates: up to 20 l/hr/cm2 at 20 mbar
• Water intrusione pressure (WIP): up to 1,2 bar
• Average pore diameter: up to 50 μm

Special rings for all hydraulic applications where the PTFE compounds are able to grant high wear resistance, low friction even without lubrication, perfect sealing at low, medium and high pressures.
Not only virgin PTFE, but mainly compounds with bronze, carbon glass fiber.

GPS | Double acting seal profile

DH9			dh9	L+0.2	G		r	O-Ring
GPS-L	GPS	GPS-P			0÷200 Bar	0÷400 Bar
15÷39.9	8÷14.9		D-4.9	2.2	0.6÷0.4	0.4÷0.3	0.4	1.78
40÷79.9	15÷39.9		D-7.5	3.2	0.8÷0.5	0.5÷0.3	0.6	2.62
80÷132.9	40÷79.9	15÷39.9	D-11.0	4.2	0.8÷0.5	0.5÷0.3	1.0	3.53
133÷329.9	80÷132.9	40÷79.9	D-15.5	6.3	1.0÷0.6	0.6÷0.4	1.2	5.34
330÷669.9	133÷329.9	80÷132.9	D-21.0	8.1	1.0÷0.6	0.6÷0.4	1.8	6.99
670÷999.9	330÷669.9	133÷329.9	D-24.5	8.1	1.2÷0.8	0.8÷0.5	1.8	6.99
	670÷999.9	330÷669.9	D-28.0	9.5	1.4÷0.8	0.8÷0.6	2.0	8.40

GPR | Essentially one-way seal profile

DH9			dh9	L+0.2	G		r	O-Ring
GPR-L	GPR	GPR-P			0÷200Bar	200÷400 Bar
17÷26.9	8÷16.9		D-4.9	2.2	0.5÷0.3	0.4÷0.2	0.4	1.78
27÷59.9	17÷26.9		D-7.3	3.2	0.7÷0.3	0.5÷0.2	0.6	2.62
60÷199.9	27÷59.9	17÷26.9	D-10.7	4.2	0.8÷0.4	0.5÷0.3	1.0	3.53
200÷255.9	60÷199.9	27÷59.9	D-15.1	6.3	0,9÷0.6	0.6÷0.4	1.2	5.34
256÷669.9	200÷255.9	60÷199.9	D-20.5	8.1	1.0÷0.6	0.7÷0.4	1.8	6.99
670÷999.9	256÷669.9	200÷255,9	D-24.0	8.1	1.1÷0.8	0.8÷0.5	1.8	6.99
	670÷999.9	256÷669.9	D-27.3	9.5	1.2÷1.0	1.0÷0.6	2.0	8.40

GCS | Double acting seal profile

d h9			D H9	L+0.2	G		r	0-Ring
GCS-L	GCS	GCS-P			0÷200 Bar	200÷400 Bar
8÷18.9	3÷7.9		d+4.9	2.2	0.4÷0.3	0.3÷0.2	0.4	1.78
19÷37.9	8÷18.9		d+7.3	3.2	0.5÷0.3	0.3÷0.2	0.6	2.62
38÷199.9	19÷37.9	8÷18.9	d+10.7	4.2	0.7÷0.4	0.4÷0.2	1.0	3.53
200÷255.9	38÷199.9	19÷37.9	d+15.1	6.3	0.8÷0.6	0.6÷0.4	1.3	5.34
256÷649.9	200÷255.9	38÷199.9	d+20.5	8.1	0.8÷0.6	0.6÷0.4	1.8	6.99
650÷999.9	256÷649.9	200÷255.9	d+24.0	8.1	0.9÷0.7	0.7÷0.4	1.8	6.99
	650÷999.9	256÷649.9	d+27.3	9.5	1.0÷0.8	0.8÷0.6	2.5	8.40

GCR | Essentially one-way seal profile

d h9			D H9	L+0.2	G		r	0-Ring
GCR-L	GCR	GCR-P			0÷200 Bar	200÷400 Bar
8÷18.9	3÷7.9		d+4.9	2.2	0.6÷0.4	0.4÷0.2	0.4	1.78
19÷37.9	8÷18.9		d+7.3	3.2	0.8÷0.5	0.5÷0.3	0.6	2.62
38÷199.9	19÷37.9	8÷18.9	d+10.7	4.2	0.8÷0.5	0.5÷0.3	1.0	3.53
200÷255.9	38÷199.9	19÷37.9	d+15.1	6.3	1.0÷0.6	0.6÷0.4	1.3	5.34
256÷649.9	200÷255.9	38÷199.9	d+20.5	8.1	1.0÷0.6	0.6÷0.4	1.5	6.99
650÷999.9	256÷649.9	200÷255.9	d+24.0	8.1	1.2÷0.8	0.8÷0.6	1.5	6.99
	650÷999.9	256÷649.9	d+27.3	9.5	1.4÷1.0	1.0÷0.7	2.5	8.40

GR/C | Scraper

d h9	DH9	L+0.2	d1 H1 1	r	O-Ring
GR/C
6÷11.9	d+4.8	3.7	d+1.5	0.4	1.78
12÷64.9	d+6.8	5.0	d+1.5	0.7	2.62
65÷250.9	d+8.8	6.0	d+1.5	1.0	3.53
251÷420.9	d+12.2	8.4	d+2.0	1.2	5.34
421÷650.9	d+16.0	11.0	d+2.0	1.5	6.99
651÷999.9	d+20.0	14.0	d+2.5	2.0	8.40

GPS/R | Rotary seal profile

D H9		d h9	L+0.2	r	G		0-Ring
Serie					0÷200 Bar	200÷300 Bar
GPS/R-0	6÷18.9	D-4.9	2.2	0.3	0.3÷0.2	0.15÷0.1	1.78
GPS/R-1	19÷37.9	D-7.5	3.2	0.5	0.6÷0.4	0.3÷0.2	2.62
GPS/R-2	38÷199.9	D-11.0	4.2	0.7	0.6÷0.4	0.3÷0.2	3.53
GPS/R-3	200÷255.9	D-15.5	6.3	1.0	0.8÷0.6	0.4÷0.3	5.34
GPS/R-4	256÷649.9	D-21.0	8.1	1.2	0.8÷0.6	0.4÷0.3	6.99
GPS/R-5	650÷999.9	D-28.0	9.5	1.5	1.2÷0.9	0.6÷0.5	8.40

GCS/R | Rotary seal profile

d h9		D H9	L+0.2	r	G		0-Ring
Serie					0÷200 Bar	200÷300 Bar
GCS/R-0	6÷18.9	d-4.9	2.2	0.3	0.3÷0.2	0.15÷0.1	1.78
GCS/R-1	19÷37.9	d-7.5	3.2	0.5	0.6÷0.4	0.3÷0.2	2.62
GCS/R-2	38÷199.9	d-11.0	4.2	0.7	0.6÷0.4	0.3÷0.2	3.53
GCS/R-3	200÷255.9	d-15.5	6.3	1.0	0.8÷0.6	0.4÷0.3	5.34
GCS/R-4	256÷649.9	d-21.0	8.1	1.2	0.8÷0.6	0.4÷0.3	6.99
GCS/R-5	650÷999.9	d-28.0	9.5	1.5	1.2÷0.9	0.6÷0.5	8.40

Bearing tapes

For the heaviest applications in the hydraulic field. motion control and mechanical field. Industrial Plastics & Machine developed a new family of products. made by special PTFE compounds and devoted technologies. in order to fulfil Industrial Plastics & Machine customers’ requirements.
Compounded PTFE materials with bronze. carbon. graphite or other fillers are designed to enhance properties such as:
- wear resistance
- coefficient of friction
- compression strength

Materials

VIRGIN PTFE
Good chemical resistance. Fair wear resistance.
Excellent coefficient of friction.
PTFE + GLASS FIBER
Enhanced wear resistance. Enhanced chemical resistance. Good compression resistance.
PTFE + CARBON
Good thermal and electrical conductivity. Good resistance to deformation. Excellent resistance to load with low coefficient of friction and high wear resistance.
Enhanced chemical resistance.
PTFE + BRONZE
Enhanced compressive strength. Good wear resistance and high thermal conductivity. Industrial Plastics & Machine has available more than 80 different compounds providing solutions to the most tribological applications. Available on request.