TENFIL Pâte en dispersion aqueuse TENFIL TF400 c’est une pâte en dispersion aqueuse (sans ajout de solvants), qu’on applique sur les filets pour améliorer l’étanchéité. Disponible pour 3 applications spécifiques (eau – air – gaz), cette pâte est fournie aux clients dans des conteneurs spécifiques.

SPECIAL PROPERTIES

• Résistance excellente à la plupart des solvants
• Pas inflammable
• Atoxique
• Facile à appliquer

TECHNICAL INFORMATION

Properties			Value
	APPEARANCE		Blue paste
	SOLID CONTENT		50 – 55%
	pH		4 – 6
	VISCOSITY		12000 +/- 1000 cP (metodo Brookfield)
	DENSITY		1,07-1,08 gr/cm3 @ 20°C
	SURFACE TENSION		38 dyn/cm
	FLASH POINT		NoT applicable
	BOILING POINT		100°C (212°F)
	STIFFNESS POINT		About 0°C
	COMPOSITION		PTFE-based aqueous dispersion

 

DRYNG TIME

	TEMPERATURE °C		FORCED AIR m3/min		DRYING TIME		END POLYMERIZATION
	80		9		80 seconds		20 minuts
	50		9		120 seconds		2 hours
	20		0		1 hour		12 hours

 

APPLICATION NOTES

	Measure		Nr. Pz. Per kg
	1/8 “		12500
	1/4 “		7000
	3/8 “		6660
	1/2 “		3350
	3/4 “		2800
	1 “		2500

 

SAFETTY
TENFIL TF400 should be handled like other Lineplus PTFE resin. When PTFE resin are heated to temperatures above 350°C, a small amount of decomposition products, which may be harmful, are given off. Avoid inhalation of these fumes. Ovens and process equipment should be vented and adequate ventilation provided in the working area. For further information refer to the Lineplus PTFE material safety data sheet. STORAGE AND STABILITY
TENFIL TF400 is stable for one year if stored in original unopened container at temperatures between +4°C - +35°C
(39,2°F – 95°F).

PACKAGING
Kg 10 - Wide-mouthed bucket with lid.