MFA

MFA

It’s a semi-crystalline fully-fluorinated melt processable fluoropolymer which offer the highest temperature rating and broadest chemical resistance of all melt processable fluoropolymers. It is an ideal choice for extreme thermal and chemical environments. MFA exhibits the outstanding thermal behaviour and chemical resistance found in PTFE, PFA and FEP. In addition, parts made with MFA have been shown to have smooth fi nished surfaces. This makes MFA a good candidate for the semiconductor, electronics and biologic applications.

MAIN PROPERTIES

Main properties
Properties Unit Method Value
Physical - Mechanical
Density g/cm3 ASTM D792 2.12 - 2.17
Hardness Shore D points ASTM D2240 55 - 60
Tensile strength N/mm2 ISO 527 v = 50mm/min microtensile die ≥ 25
Elongation at break % ISO 527 v = 50mm/min microtensile die ≥ 300
Flexural Modulus N/mm2 ASTM D790 600
Thermal
Melting point °C / 280 - 290
Thermal expansion coefficient (linear) 25 - 100°C 10-5 (mm/mm)/°C ASTM D696 12 - 20
Service Temperature °C / -200 / +205
Thermal conductivity W/mK ASTM D177 0.24
Electrical
Dielectric strength KV/mm ASTM D149 30 - 40

NEWS& EVENTS

Wednesday, 29 April 2020 12:57

PATILUX – ONE MORE IMPORTANT AGRICULTURAL PROJECT ACHIEVED IN CHINA

Well known PATILUX film from PATI has been chosen, among an international selection of products, for a strategic Chinese project focused to move the agriculture production closer to large urban centers in different areas in China.

Read more
Wednesday, 29 April 2020 12:35

AIR AND GAS COMPRESSOR SPECIAL PTFE GRADES FROM GUARNIFLON

The well known GCS family of products from Guarniflon is explained and introduced in the following clip.

Read more